FLEXIBLE HOSE SOLUTIONS UP TO 12''
We rent out hoses in many types, assembled up to 12″. You can also come to us for the complete package like reducers, adaptors, gaskets, bolts and nuts. Cooling water, air, chemicals, fuel or oil. For any application, our experts can advise the right product.
OUR PRODUCT RANGE
STAINLESS STEEL HOSES
Available with a single or double braid. With a stainless steel protective spiral. Very suitable for gaseous and liquid media that are chemically aggressive, corrosive and/or of a very low or high temperature.
Available in diameters from 2" to 12";- Fitted with ANSI flanges;
- Temperature range of -270 to +600 °C;
- BS6501: Part1:1991 and ISO 10380:2003.
ADARA HEAVY DUTY WATER HOSE
The Adara hose is often used within various branches in the industry. The rubber suction and discharge hose is suitable for the transport of (dirty) water, slurry and non-aggressive liquids.
- Available in diameters from 2" to 12";
- Fitted with DIN flanges or Camlock couplings;
- Temperature range of -40 to +125 °C (EPDM) and -30 to +80 °C (SBR);
- ISO 7751.
CHEMICAL HOSES EPDM, UPE, PTFE
All EPDM, UPE and PTFE hoses are in stock. Suitable for polar solvents and chemicals. Rubber chemical suction and delivery hoses are often used in (petro) chemical industry.
- Available in diameters from 2" to 6";
- Installed with ANSI / DIN flanges, Camlock or Elaflex fittings;
- Temperature range of -30 to +100 °C, depending on the type;
- EN 12115:2015.
MERCUR OIL HOSES
Our rental fleet includes Mercur premium quality oil hoses are suitable for transporting hydrocarbons. Suitable for aroma content up to 50%. Applied in the industrial and maritime sectors.
- Available in diameters from 2" to 12";
- Fitted with ANSI flanges or tankwagon couplings;
- Temperature range -30 to +82 °C, depending on type;
- Exceeding EN 12115:2015 and EN 1765.
MERCUR DUNLOP HIFLEX
The Dunlop Hiflex is extremely suitable for loading and unloading tankers. The hose is available in both hard-wall and soft-wall versions.
- Available in diameters from 4" to 6";
- Fitted with ANSI 150# flanges;
- Temperature range -20 to +82°C;
- This hose exceeds the EN 1765 standard.
ACCESSOIRES
Below you can see the fittings that we have as standard in our range. Almost all fittings are made of stainless steel, because of the durability of the material and the wide range of uses.
- T-pieces: 2" to 10". DIN + ANSI
- Elbows: Bends: 2" through 12". DIN + ANSI
- Reducers: 2" through 12". DIN + ANSI
- Butterfly valves: 2" through 12". DIN + ANSI
- Check valves
COMPOSITE HOSES
The Compotec® hoses are perfectly suited for aggressive and chemical liquids. Flowmasters composite hoses are lightweight, strong, highly flexible, antistatic and kink resistant.
- Available in diameters from 2" to 12";
- Fitted with ANSI 150LBS or 300LBS flanges;
- Temperature range -40 to +125 °C, depending on type;
- EN 13765:2015 TYPE 1 + EN13765:2015 TYPE 3, Lloyds and DNV type approved.
COMPOTEC PTFE NANOTEC
Flowmasters composite hoses are lightweight, strong, highly flexible, anti-static and kink resistant. Its high chemical resistance of Compotec PTFE Nanotec makes it the ideal hose for conveying a wide range of highly aggressive chemicals.
- Available in diameters from 2" to 12";
- Fitted with ANSI flanges;
- Temperature range -40 to +125°C;
- EN13765:2015 TYPE 3, Lloyds and DNV type approved.
COMPOTEC CRYOTEC 660 LG
Flowmasters composite hoses are lightweight, strong, highly flexible, anti-static and kink resistant. The Compotec Cryotec is the ideal hose for transporting extremely cold liquid gasses.
- Available in diameters from 2" to 12";
- Equipped with ANSI 300LBS flanges;
- Temperature range -105 to +100 °C;
- EN13766:2010, Lloyds and DNV type approved.
COMPOTEC OIL
Flowmasters composite hoses are lightweight, strong, highly flexible, anti-static and kink resistant. The Compotec Oil complies with all standards and is an extremely suitable hose for transporting hydrocarbons.
- Available in diameters from 2" to 8";
- Equipped with ANSI flanges;
- Temperature range -30 to +80 °C;
- EN13765:2015 TYPE 2, Lloyds and DNV type approved.
COMPOTEC VAPERFLON
- Available in diameters from 2" to 12";
- Equipped with ANSI flanges;
- Temperature range -30 to +80 °C;
- 33CFR PART 154.810, Lloyds and DNV type approved.
BETIN 20 air-/nitrogen hose
Robust rubber compressed air hose suitable for heavy duty air applications, resistant to oily air. In addition, this hose is often used for the medium of nitrogen.
- Available in diameters from 2" to 4";
- Hammer uniuons or flanges;
- Temperature range -30 to +80 °C;
- Working pressure: 20 bar.
SOLUTIONS FOR:
OFFSHORE
We have a wide range of robust and wear-resistant products, which are specially made to perform under the most extreme conditions. All products meet the strictest requirements, such as: EN1765, EN13482, EN1762 etc. Our parent company Mees van den Brink has more than 45 years of experience in hoses and couplings for use in and at sea.
MARITIME
We have more than 45 years of experience and know-how with regard to hose assemblies and couplings for use in and at sea. All products meet the strictest requirements, such as: EN1765, EN13482, EN1762 etc. We have a wide range of robust and wear-resistant products, which are specially designed and formulated to perform under the most extreme conditions.
INDUSTRIAL
Industrial cleaning requires expertise, good material is a requirement. Through our parent company Mees van den Brink, we have more than 45 years of experience and know-how with regard to hose assemblies and couplings for use in industrial cleaning.
CLIMATE CONTROL
Flowmasters uses water hoses that can withstand temperatures from -30 degrees to +125 degrees. Hoses are available in different sizes, the hoses are also resistant to antifreeze liquids.
